Mednarodni projekti
Advanced dry processes for low cost, thin multicrystalline silicon solar cell technology- (ADVOCATE)
Raziskovalci (1)
| št. |
Evidenčna št. |
Ime in priimek |
Razisk. področje |
Vloga |
Obdobje |
Štev. publikacijŠtev. publikacij |
| 1. |
02813 |
dr. Tadej Bajd |
Sistemi in kibernetika |
Vodja |
2001 - 2004 |
0 |
Organizacije (1)
| št. |
Evidenčna št. |
Razisk. organizacija |
Kraj |
Matična številka |
Štev. publikacijŠtev. publikacij |
| 1. |
0510 |
Univerza v Ljubljani |
Ljubljana |
5085063 |
0 |
Povzetek
This project focuses on significant cost reduction of crystalline silicon solar cells by developing fully dry, environmentally friendly multi-Si cell fabrication processes.The proposed novel, unconventional cell fabrication technology is capable to:(1) process large area, thin (down to 100 microns) and fragile silicon wafers with a high throughput and a low breakage rate on automated production lines with reduced or without manual water handling operations,(2)use of all types of low cost crystalline silicon substrates: standard multi-Si,EMC multi-Si, all types of silicon ribbons,(3) remove all wet chemical and water rinsing processing steps,(4) reduce the health risk in the production,(5)reach cell efficiency > 16% on ultra thin wafers.The project is aiming at the mid-term cost reduction of the multicrystalline solar cells down to 1 Eur/Wp. Cell process will be executed by two processing techniques: screen printing and plasma.
